How To Use A Pocket Hole Jig– New User Guide
So, you have got your pocket hole jig at hand and just waiting to drill the very first invisible hole in your woodwork. If you are wondering and do not know How To Use A Pocket Hole Jig, we assure you- this post is absolutely for you. All you need is to follow the steps below to get started with your personal as well as professional woodwork project right now! Let’s go to the point straight.
Step 1: Get To Know Your Pocket Hole Jig
Before you start to use any particular tool, the first thing you need to do is- get to know the tool. Be it an electricity run tool or simply handy tool; you need to know how it works before you start working with it. You can check out the instruction inside the box to have a detailed description of each part of a pocket hole jig.
A pocket hole jig has mainly two major components; jig and the drill bit. Usually, pocket hole jigs also contain a square tipped driver to assist you drilling Kreg Jig Screws comfortably. You will find an easy to adjust stop collar on the bit to set the exact distance you need to drill. Check out Pocket Hole Jig Review for more details.
Step 2: Measure Your Wood
The very first thing you need to do is- measure the thickness of the piece you want to drill. It is always a decent idea to measure the width manually other than considering what it is labeled on the package. It happens so often that the wood gets shrink from its actual width. So, measure the depth of the wood by yourself to determine how depth you need to drill.
Step 3: Adjust the Depth Collar
When you are done with the measurement, it is time to set the depth collar to drill exactly the depth you want. Simply, put the bit into the scale marked groove on the body of your jig and adjust the stop collar accordingly. When you set it right, the bit will drill holes to the exact depth you just set.
Step 4: Adjust Jig Placement
Now, look at the jig. There is a measurement scale on the side of the jig too, right? You need to set the jig placement according to the width of the piece you want to drill. You will find a gold thumbscrew at the back of the jig. Loosen the screw and adjust the placement accordingly. Finally, tighten the gold thumbscrew to prevent misplace when drilling holes.
Step 5: Mount the Wood & Start Drilling
Now, it is time to mount the wood board onto the jig and start drilling holes. Do not forget to clamp the jig to your workbench to keep it steady while drilling holes. Now, place your piece of wood and press the clamp lever forward. Adjust the clamp lever and tighten the screw to secure the piece of wood on the jig.
Finally, penetrate the bit into the pocket holes of the jig and start drilling in the forward motion. Keep drilling until the stop collar socket set on the bit reach the entrance of the pocket holes and there you go. Do not forget to drill at least two holes for stronger joints. Use standard pocket hole screws for more secured joints that last for years.